国际口腔科学（英文版）杂志

Spindle cell lipoma (SCL) is a benign lipomatous neoplasm typically located in the posterior neck and back of older males. It presents as a well-circumscribed mass in the buccal mucosa, tongue, floor of the mouth or hard palate. There are only two case reports of SCL in the gingiva and alveolar ridge. Here, we report a case of SCL in the mandibular mucogingival junction of a 68-year-old male. Clinical, histopathological and immunohistochemical findings are presented. Although oral SCL is rare, it should be considered in the differential diagnosis of spindle cell neoplasms occurring in the oral cavity.

作者： 刊期： 2014年第03期

This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients (TECs), when zirconia ceramics were coloured at green stage. Zirconia blocks (N5240;6 mm37 mm37 mm) were manufactured from two materials namely, ICE Zirconia (Group 1) and Prettau Zirconia (Group 2). In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid (shade A2). Three different veneering ceramics with different TEC (ICE Ceramic, GC Initial Zr and IPS e.max Ceram) were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys (Esteticor Plus) veneered with ceramic (VM 13) (n516) acted as the control group. Core-veneer interface of the specimens were subjected to shear force in the Universal Testing Machine (0.5 mm?min21). Neither the zirconia core material (P50.318) nor colouring (P50.188) significantly affected the results (three-way analysis of variance, Tukey’s test). But the results were significantly affected by the veneering ceramic (P50.000). Control group exhibited significantly higher mean bond strength values (45.768) MPa than all other tested groups ((27.164.1)2(39.764.7) and (27.465.6)2(35.964.7) MPa with and without colouring, respectively) (P,0.001). While in zirconia-veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering ,1/3 of the substrate surface, in the metal-ceramic group, veneering ceramic was left adhered .1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core-veneer adhesion. Metal-ceramic adhesion was more reliable than all zirconia-veneer ceramics tested.

作者： 刊期： 2013年第04期

We investigated the compensatory trends of mesiodistal angulation of first molars in malocclusion cases. We compared differences in the angulation of first molars in different developmental stages, malocclusion classifications and skeletal patterns. The medical records and lateral cephalogrammes of 1 403 malocclusion cases taken before treatment were measured to evaluate compensation of molar angulation in relation to the skeletal jaw. The cases were stratified by age, Angle classification and skeletal patterns. Differences in the mesiodistal angulation of the first molars were compared among the stratifications. We observed three main phenomena. First, angulation of the upper first molar varied significantly with age and tipped most distally in cases aged ,12 years and least distally in cases aged .16 years. The lower first molar did not show such differences. Second, in Angle Class II or skeletal Class II cases, the upper first molar was the most distally tipped, the lower first molar was the most mesially tipped, and opposite angulation compensation was observed in Class III cases. Third, in high-angle cases, the upper and lower first molars were the most distally tipped, and opposite angulation compensation was observed in low-angle cases. These data suggest that the angulation of the molars compensated for various growth patterns and malocclusion types. Hence, awareness of molar angulation compensation would help to adjust occlusal relationships, control anchorage and increase the chances of long-term stability.

作者： 刊期： 2014年第03期

Surgical correction is central to current team-approached cleft treatment. Cleft surgeons are always concerned about the impact of their surgical maneuver on the growth of the maxilla. Hypoplastic maxilla, concaved mid-face and deformed dental arch have constantly been reported after cleft treatments. It is very hard to completely circumvent these postoperative complications by current surgical protocols. In this paper, we discussed the factors that inhibit the maxillofacial growth on cleft patients. These factors included pre-surgical intervention, the timing of cleft palate and alveolae repair, surgical design and treatment protocol. Also, we made a review about the influence on the maxillary growth in un-operated cleft patients. On the basis of previous researches, we can conclude that most of scholars express identity of views in these aspects: early palatoplasty lead to maxilla growth inhibition in all dimensions; secondary alveolar bone graft had no influence on maxilla sagittal growth; cleft lip repair inhibited maxilla sagittal length in patients with cleft lip and palate;Veau’s pushback palatoplasty and Langenbeck’s palatoplasty with relaxing incisions were most detrimental to growth; Furlow palatoplasty showed little detrimental effect on maxilla growth;timing of hard palate closure, instead of the sequence of hard or soft palate repair, determined the postoperative growth. Still, scholars hold controversial viewpoints in some issues, for example, un-operated clefts have normal growth potential or not, pre-surgical intervention and pharyngoplasty inhibited maxillofacial growth or not.

作者： 刊期： 2015年第01期

Fibroblast growth factor 23 (FGF23) is a hormone that is mainly secreted by osteocytes and osteoblasts in bone. The critical role of FGF23 in mineral ion homeostasis was first identified in human genetic and acquired rachitic diseases and has been further characterised in animal models. Recent studies have revealed that the levels of FGF23 increase significantly at the very early stages of chronic kidney disease (CKD) and may play a critical role in mineral ion disorders and bone metabolism in these patients. Our recent publications have also shown that FGF23 and its cofactor, Klotho, may play an independent role in directly regulating bone mineralisation instead of producing a systematic effect. In this review, we will discuss the new role of FGF23 in bone mineralisation and the pathophysiology of CKD-related bone disorders.

作者： 刊期： 2015年第01期

Streptococcus mutans is a common Gram-positive bacterium and plays a significant role in dental caries. Tobacco and/or nicotine have documented effects on S. mutans growth and colonization. Sortase A is used by many Gram-positive bacteria, including S. mutans, to facilitate the insertion of certain cell surface proteins, containing an LPXTGX motif such as antigen I/II. This study examined the effect of nicotine on the function of sortase A to control the physiology and growth of S. mutans using wild-type S. mutans NG8, and its isogenic sortase-defective and-complemented strains. Briefly, the strains were treated with increasing amounts of nicotine in planktonic growth, biofilm metabolism, and sucrose-induced and saliva-induced antigen I/II-dependent biofilm formation assays. The strains exhibited no significant differences with different concentrations of nicotine in planktonic growth assays. However, they had significantly increased (Pf0.05) biofilm metabolic activity (2-to 3-fold increase) as the concentration of nicotine increased. Furthermore, the sortase-defective strain was more sensitive metabolically to nicotine than the wild-type or sortase-complemented strains. All strains had significantly increased sucrose-induced biofilm formation (2-to 3-fold increase) as a result of increasing concentrations of nicotine. However, the sortase-defective strain was not able to make as much sucrose-and saliva-induced biofilm as the wild-type NG8 did with increasing nicotine concentrations. These results indicated that nicotine increased metabolic activity and sucrose-induced biofilm formation. The saliva-induced biofilm formation assay and qPCR data suggested that antigen I/II was upregulated with nicotine but biofilm was not able to be formed as much as wild-type NG8 without functional sortase A.

作者： 刊期： 2013年第04期

Dentin matrix protein 1 (DMP1) is essential to odontogenesis. Its mutations in human subjects lead to dental problems such as dental deformities, hypomineralization and periodontal impairment. Primarily, DMP1 is considered as an extracellular matrix protein that promotes hydroxyapatite formation and activates intracellular signaling pathway via interacting with avb3 integrin. Recent in vitro studies suggested that DMP1 might also act as a transcription factor. In this study, we examined whether full-length DMP1 could function as a transcription factor in the nucleus and regulate odontogenesis in vivo. We first demonstrated that a patient with the DMP1 M1V mutation, which presumably causes a loss of the secretory DMP1 but does not affect the nuclear translocation of DMP1, shows a typical rachitic tooth defect. Furthermore, we generated transgenic mice expressing NLSDMP1, in which the endoplasmic reticulum (ER) entry signal sequence of DMP1 was replaced by a nuclear localization signal (NLS) sequence, under the control of a 3.6 kb rat type I collagen promoter plus a 1.6 kb intron 1. We then crossbred the NLSDMP1 transgenic mice with Dmp1 null mice to express the NLSDMP1 in Dmp1-deficient genetic background. Although immunohistochemistry demonstrated that NLSDMP1 was localized in the nuclei of the preodontoblasts and odontoblasts, the histological, morphological and biochemical analyses showed that it failed to rescue the dental and periodontal defects as well as the delayed tooth eruption in Dmp1 null mice. These data suggest that the full-length DMP1 plays no apparent role in the nucleus during odontogenesis.

作者： 刊期： 2014年第03期

To test the efficacy of two calcium phosphate pastes compared to that of fluoride toothpaste on remineralizing artificial caries in situ, this study had a double-blind crossover in situ design, involving three experimental phases of 14 days each, with an 8-day washout period between phases. Nine healthy subjects participated in the study. The subjects wore removable palatal appliances mounted with six human enamel slabs with artificial caries lesions, and in each of the experimental phases, used one of the following methods two times/day:group A, brushing with 1.0 g of Colgate Regular Flavor, followed by applying 0.25 g of Tooth Mousse Plus;group B, brushing with 0.25 g of Clinpro Tooth Cre`me;and group C, brushing with 1.0 g of Colgate Regular Flavor. After 14 days, the enamel slabs (54 slabs/group) were embedded in resin, sectioned and examined with a polarized-light microscope, and the lesion areas were quantified using Image-Pro Plus. All experimental groups showed a significant reduction in lesion area compared to the initial lesion area (paired t-test, P,0.001). The mean reduction in lesion area of Groups A, B and C were (0.02960.010), (0.03060.009) and (0.02760.009) mm2, respectively. There were no statistical differences between groups (Kruskal-Wallis test, P.0.05). All three groups remineralized the enamel slab lesions, indicating model sensitivity to fluoride. Given the differences in usage amounts and treated regimens, Clinpro Tooth Cre`me provided similar benefits to the fluoride toothpaste;however, no additional benefit of Tooth Mousse Plus was observed when used in conjunction with the fluoride toothpaste.

作者： 刊期： 2013年第04期

The aim of the study was to evaluate the effect of adding acrylamide monomer (AAm) on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly(methyl methacrylate) (PMMA) denture-base resins. Specimens (n510) were fabricated from a conventional heat-activated QC-20 (Qc-) and a microwave heat-activated Acron MC (Ac-) PMMA resins. Powder/liquid ratio followed the manufacturer’s instructions for the control groups (Qc-c and Ac-c) and for the copolymer groups, the resins were prepared with 5%(25), 10%(210), 15%(215) and 20%(220) acrylamide contents, according to the molecular weight ratio, respectively. The flexural strength and flexural modulus were measured by a three-point bending test. The data obtained were statistically analyzed by Kruskal-Wallis test (a50.05) to determine significant differences between the groups. The chemical structures of the resins were characterized by the nuclear magnetic resonance spectroscopy. Thermal stabilities were determined by thermogravimetric analysis (TGA) with a heating rate of 10 6C?min21 from 35 6C to 600 6C. Control groups from both acrylic resins showed the lowest flexural strength values. Qc-15 showed significant increase in the flexural strength when compared to Qc-c (P,0.01). Ac-10 and Ac-15 showed significance when compared to Ac-c (P,0.01). Acrylamide incorporation increased the elastic modulus in Qc-10, Qc-15 and Qc-20 when compared to Qc-c (P,0.01). Also significant increase was observed in Ac-10, Ac-15 and Ac-20 copolymer groups when compared to Ac-c (P,0.01). According to the 1H-nuclear magnetic resonance (NMR) results, acrylamide copolymerization was confirmed in the experimental groups. TGA results showed that the thermal stability of PMMA is increased by the insertion of AAm.

作者： 刊期： 2013年第04期

The fibrous epulis, a common tumor-like lesion of the gingiva, appears in the interdental papilla as a result of local irritation. Lesions are asymptomatic and have a variable growth rate. A 75-year-old woman was referred for the evaluation of a large painless gingival mass. It had started 10 years back and has been increasing in size the last year. No bone involvement was noted. The tumor was totally removed by excision with surgical scalpel under local anesthesia without teeth extraction. The microscopic findings were suggestive of a fibrous epulis. Differential diagnosis, clinical considerations and factors to prevent recurrence are discussed.

作者： 刊期： 2014年第03期